Belt Conveyor Build - Part 1

  • Опубликовано: 9 месяцев назад

    Donn DIY

    Длительность: 18:17

    Latest video: ruplayers.com/tools/u6agsKeVhKOdiZ8/video.html
    Fabricating a belt conveyor for my homemade firewood processor so I can transport firewood straight into the firewood crates. This means I don't have to stack firewood ever again. I'm using scrap steel and bits and pieces I have laying around on the homestead to keep the project cost down. Stay tuned for the second part on this build.
    Check out my other videos on my channel page: ruplayers.com
    #donndiy #homemade #firewood
    Soundtrack:
    Pomade - Silent Partner (RUplayers Audio Library)
    Welding equipment borrowed from Spetselektroodi AS, Estonia:
    Fronius TransSteel 2700 welder
    Optrel Crystal 2.0 Welding Helmet
    Hypertherm Powermax 45 XP plasma cutter

Donn DIY
Donn DIY

Firewood processor build series: https://www.youtube.com/playlist?list=PLkmF7FAZBzkVRPU6b-IeJVu91-frjF8v3 Check out my other videos on my channel page: https://www.youtube.com/c/DonnDIY Welding equipment borrowed from Spetselektroodi AS, Estonia: Fronius TransSteel 2700 welder Optrel Crystal 2.0 Welding Helmet Hypertherm Powermax 45 XP plasma cutter

9 месяцев назад
David Harrell
David Harrell

00

3 месяца назад
Бишкек Сити
Бишкек Сити

@Tatiana Raquel ???,,,,,,????????????$$$$$$$$0

8 месяцев назад
Бишкек Сити
Бишкек Сити

Ассалому алейкум кандайсын Ассалому алейкум кандайсын 33ү болуп бөлүнбөсө 33ү бк333өебблб3бблббб33ббб3бб333болнбю33юеб4б3белюб333б43б б3бю3333б3б3еб33б3ббббб33б3бб3өкб3ю3бу бул бул 433күйүккө к3бюк3333юб44333333бюджеттик б3333бб3е3бб3деп ю3б3деп 333333 333маселеге нью 43ү көңүл 3е33б33ле3ден 3ү б бб33е3б33бб33е3кюбе3е3кбб3е3е33б33б33фото б3б3клөебю3кбб33е33жана болуп 33блб33бббб333б33өбб333фото 33б33333ден бкб343е33б б3ббнотт

8 месяцев назад
Team• Кайфарик!
Team• Кайфарик!

.

8 месяцев назад
ThinkFreely2012
ThinkFreely2012

I think door hinges for the belt joints may work better.

9 месяцев назад
cocospops
cocospops

My man you can bend large plates with your workbench, some scrap steel and a bunch of clamps

7 дней назад
Парень с БОЛЬШОЙ деревни
Парень с БОЛЬШОЙ деревни

Приятно смотреть на качественную работу👍

17 дней назад
Юрий Дерибас
Юрий Дерибас

Для чего этот транспортёр я так и не понял, а слесарная мастерская классная.

18 дней назад
Александр Михайлов
Александр Михайлов

Масло в редукторе менять не будешь?Редуктор раком поставил.

23 дня назад
Павел
Павел

Как работает слабо снять, нахй я это смотрел, Задорнов сказал Американцы ........ Он прав.

24 дня назад
EASY Stuff DIY
EASY Stuff DIY

excellent

25 дней назад
ЭДУАРД ВАСИЛЬЕВ
ЭДУАРД ВАСИЛЬЕВ

шоо эту таке

27 дней назад
Sergey Sidorov
Sergey Sidorov

Как хорошо смотреть на Человека Труда. Осмысленного, творческого. А на рожи картавые не хочу, даже за деньги

27 дней назад
Дмитрий Зырянов
Дмитрий Зырянов

Молодец!

29 дней назад
ЮРИЙ ЛАРИН
ЮРИЙ ЛАРИН

нахуя я смотрю эту хрень?

Месяц назад
EMechanics
EMechanics

It's heavy fabrication but very interesting works

Месяц назад
Alfa & Omega
Alfa & Omega

Подскажите пожалуйста, что за отрезной присутствует в кадре?

Месяц назад
Алмаз Алмаз
Алмаз Алмаз

???

2 месяца назад
مروان ك ك
مروان ك ك

عمل جيد. اكملة

2 месяца назад
MedSou
MedSou

*Excellent work* 👍👍👍👍👍

2 месяца назад
Billy Proctor
Billy Proctor

Nice work and great video, moves along at the perfect speed. You've had some good teachers along the way and have taken a true interest in your trade. Nice to see these days. Old retired guy in Canada, Cheers, Billy

3 месяца назад
Nagaraj Naik
Nagaraj Naik

thank u very much

3 месяца назад
Northwest Connection
Northwest Connection

I bet by next year Las Vegas will have odd's on whether or not there is anything that you CAN"T build. You're a machine!! I have learned so much. WOW!

3 месяца назад
Sunniboi Tv
Sunniboi Tv

Är denhär snubben svensk eller norsk?

4 месяца назад
Russell P.
Russell P.

It’s reassuring to know there are still younger people who know how to build stuff. Gives us older guys hope for the future. 👍🏻👍🏻👍🏻

4 месяца назад
hunt4fish
hunt4fish

Love that cutoff saw!

5 месяцев назад
Rancher 1963
Rancher 1963

I wish my scrap metal pile was as stacked with stuff as his is LOL

5 месяцев назад
Popa Alexandru
Popa Alexandru

Isn't the welding of rollers in the lathe better? That's how I get there anyway ...

5 месяцев назад
Г. Е. Н Г. Е. Н
Г. Е. Н Г. Е. Н

И в итоге не получилось, бросил эту затею...

5 месяцев назад
Abu Faris ابوفارس
Abu Faris ابوفارس

Very 👍🏼 but old tyre was bad choice

7 месяцев назад
Bart De Reu
Bart De Reu

your motor coupler is just plain wrong.

7 месяцев назад
Roland Knoll
Roland Knoll

putting a slight crown in the middle of drive roller or idler roller makes this track a lot easier good

8 месяцев назад
Donn DIY
Donn DIY

Yup.

8 месяцев назад
Amin Nemec
Amin Nemec

Зачем я это смотрю?

8 месяцев назад
Ritu's Tech
Ritu's Tech

I love you bro😍 I like your work

8 месяцев назад
Mohamed Baghdadi
Mohamed Baghdadi

Donn comment fabriquer une vis sons fin ???

8 месяцев назад
PNW RC
PNW RC

I wish making belts were as easy for my 14th scale RC trucks & construction equipment! We've tried to slap together some things with ill or no success.

8 месяцев назад
TONG Channel
TONG Channel

I love video you💝💝💝💝💝+🔔

8 месяцев назад
Mart Ordlik
Mart Ordlik

Päris hea

8 месяцев назад
Donn DIY
Donn DIY

🤘

8 месяцев назад
Oliwer Zetterholm
Oliwer Zetterholm

No video the weekend that was ? Great work with all of your projects Greetings from sweden !!!

8 месяцев назад
Donn DIY
Donn DIY

Yes. But new video this week. 😉 Stay tuned for Saturday! 👍

8 месяцев назад
Rob LeBrun
Rob LeBrun

I would have cut my leg and probably lost a finger trying to cut that tire like that lol

8 месяцев назад
Donn DIY
Donn DIY

That box knife is a scary thing indeed. But as with the chainsaw - one has to know all the time where the tip of the blade is. 😀

8 месяцев назад
Treebutcher
Treebutcher

Use a belt off a round baler or big square baler. Most farm repair places have used ones.

8 месяцев назад
Donn DIY
Donn DIY

I already found a piece of an actual conveyor belt and the conveyor is working at the moment really well.

8 месяцев назад
Rustam Leesment
Rustam Leesment

ma lammutan helsingit. mis sind huvitaks. elektri mootorid, roostevaba toru, lihtsalt toru. anna teada . rekka söidab tallin võru

8 месяцев назад
Donn DIY
Donn DIY

Kõik huvitab. Ainult, et mis on asjade hinnad ja mis maksab kohaletoomine? Ehk on võimalik meili teel suhelda - donndiy ät gmail punkt com

8 месяцев назад
Xxx _O7
Xxx _O7

Please make a video on how to make a turboSawmill

8 месяцев назад
Donn DIY
Donn DIY

That's a good idea!

8 месяцев назад
Ana Adam
Ana Adam

Wow,.argond strong🇮🇩👍🌹

8 месяцев назад
Donn DIY
Donn DIY

👍💪

8 месяцев назад
Андрей Пискунов
Андрей Пискунов

Непонятно

8 месяцев назад
Андрей Пискунов
Андрей Пискунов

У и что ты сделал?

8 месяцев назад
Ruudi S
Ruudi S

Mulle meeldib sinu tööstiil ja ehitatud seadmete kvaliteet. Kas sa teed tellimustöid ka või ehitad ainult oma asju?

8 месяцев назад
Donn DIY
Donn DIY

Suured-suured tänud! Senikaua, kuni teenust tegemata ära elab, senikaua aega selle peale ei kuluta ja teen projekte, mida olen liiga kaua ootel hoidnud. Seega ei, hetkel teenust ei tee kahjuks. 😳

8 месяцев назад
holger koehler
holger koehler

Locker 40 Stunden Arbeit....

8 месяцев назад
Tharuka Fernando
Tharuka Fernando

I like the motor coupling

8 месяцев назад
Soependi Channel
Soependi Channel

Like 👍

8 месяцев назад
antonio carlos
antonio carlos

nao entendi nada

8 месяцев назад
TheBeet6661
TheBeet6661

Скорее всего не сможет протянуть ленту с грузом. Площадь трения будет большая, по сравнению с площадью катка. Нужно будет делать промежуточные ролики, и какие нибудь зацепы на ведущий каток.

8 месяцев назад
Павел Белоусов
Павел Белоусов

Every thing ok,more english coments go on fffffff

8 месяцев назад
Миша Шуть
Миша Шуть

Канал если есть станки

8 месяцев назад
vasil shaniuk
vasil shaniuk

Привет друг ,а инвалидную коляску на резиновых гусеницах ,с дизелем и управление джёстиком ты бы смог сделать? А я был бы твоим первым клиентом. Жду предложений!

8 месяцев назад
Iron Front
Iron Front

The nylon webbing the ratchet strap is made of would make a better belt. Real conveyors, even a supermarket belt or treadmill. The whole length of the belt upto the roller, rests on a flat board. It makes contact and the weight of the object on belt is taken by the board underneath. In a treadmill I know the board is a low friction plastic and the underside of the belt is like woven textile. Nylon webbing on a steel surface would be very low friction too.

8 месяцев назад
Donn DIY
Donn DIY

I already solved the problem. I found an actual strip of conveyor belt I forgot about.

8 месяцев назад
Golden Boy
Golden Boy

Давай продолжение

8 месяцев назад
Andrew Walsh
Andrew Walsh

That's a really good coupling design. Great for minor misalignment. Well done.

8 месяцев назад
Donn DIY
Donn DIY

I love that coupling style. Easy to manufacture and very forgiving.

8 месяцев назад
edgein
edgein

Put the belt inside out, maybe they will track better since you get the "crown" on the belt instead of the rollers. Also, instead of overlapping the joints make 6 holes, 3 for each side of the joint?

8 месяцев назад
Donn DIY
Donn DIY

I already scrapped the tire protector belt conveyor belt idea. I turned crown on the rollers and found an actual conveyor belt strip that works perfectly. I'll try to finish the conveyor next week and make a video upcoming Friday/Saturday. Stay tuned! 😉

8 месяцев назад
Dharmendra Singh Virk
Dharmendra Singh Virk

Felt like fooled coz no end.

8 месяцев назад
Donn DIY
Donn DIY

That's because it is "Part 1" of the build. Part two will come next week! 😉

8 месяцев назад
Сергей Рещетников
Сергей Рещетников

Ну уж листогибочный станок ,сам бог велел заиметь.

8 месяцев назад
บรรพต โคแพร่
บรรพต โคแพร่

สุดยอด

8 месяцев назад
บรรพต โคแพร่
บรรพต โคแพร่

คุณสุดยอดดด

8 месяцев назад
Нурбек Рысбаев
Нурбек Рысбаев

Қазахстаннан салам👍👍👍

8 месяцев назад
Николай Каракулов
Николай Каракулов

Малодец! Лайк. Ещё буду смотреть лайки ставить. Да можешь зайти и на мой канал. Удачи тибе.

8 месяцев назад
Рустем Рустем
Рустем Рустем

Здраствуй ! Что это ?

8 месяцев назад
Donn DIY
Donn DIY

Конвейер.

8 месяцев назад
Виктор Занько
Виктор Занько

д а л б а ё б

8 месяцев назад
Donn DIY
Donn DIY

Ты?

8 месяцев назад
maya tom
maya tom

结尾看不懂,毕竟我是门外汉的啦。谢谢。Thank

8 месяцев назад
Ronaldo Bezerra
Ronaldo Bezerra

I really liked it 👍. thanks buddy

8 месяцев назад
Donn DIY
Donn DIY

Thanks for watching! 💪

8 месяцев назад
GeneralChaos1756
GeneralChaos1756

I like the peoject, i wonder if you'd have better luck using some old snowmobile tracks for the belt instead of the tires? They would ride flatter if nothing else.

8 месяцев назад
Donn DIY
Donn DIY

Yup. I scrapped the tire idea. I crowned the rollers and found a flat conveyor belt strip and now the conveyor works as it was supposed to. New video next week. Stay tuned!

8 месяцев назад
Estonec Krasnojarsk
Estonec Krasnojarsk

👍

8 месяцев назад
Вадим Климкин
Вадим Климкин

ждем продолжение!!!

8 месяцев назад
Donn DIY
Donn DIY

Продолжение на следующей неделе !!!

8 месяцев назад
Tolyan Zavyalov
Tolyan Zavyalov

Как всегда классно!!!!ЛАЙК!!!

8 месяцев назад
Ovidiu Ciuca
Ovidiu Ciuca

Next part?😊😊😊

8 месяцев назад
Donn DIY
Donn DIY

Next part next week! 😉

8 месяцев назад
yaciles
yaciles

many thanks; this can have a lot of uses; basically anywhere a lot of loose material has to be shifted ....

8 месяцев назад
Donn DIY
Donn DIY

This is why I'm building this conveyor separately from the firewood processor. We have to move a lot of dirt from the basement. So this conveyor might come in handy.

8 месяцев назад
Вирш Мазипа
Вирш Мазипа

У меня есть такой же зелёный моторредуктор. Один в один.

8 месяцев назад
Donn DIY
Donn DIY

👍

8 месяцев назад
Madhuntr
Madhuntr

someone played to much Factorio XD

8 месяцев назад
F3iAKeT5
F3iAKeT5

続き 早く ( ´艸`)

8 месяцев назад
Brian Johnson
Brian Johnson

What brand of clamp are you using?

8 месяцев назад
Donn DIY
Donn DIY

Piher.

8 месяцев назад
B100dyPhr34k
B100dyPhr34k

So... tank tracks?

8 месяцев назад
Anti -
Anti -

Wait, you build a conveyor using all that iron but you cant build a metal break using heavy gauge angle for the body then some round stock and tubing for the handles and hinges?

8 месяцев назад
Ottawaan
Ottawaan

You get right to it!!! Great projects always. Thanks for the content.

8 месяцев назад
Donn DIY
Donn DIY

Thank you!

8 месяцев назад
fly998
fly998

Sei un Mago... 😊 bravo!!!

8 месяцев назад
علي الشيخ
علي الشيخ

عمل رائع شكرا لك اخي

8 месяцев назад
Eric Martin
Eric Martin

Danger! Spider at 15:30ish....

8 месяцев назад
Donn DIY
Donn DIY

I was hoping someone would notice the spider. Fortunately we don't have venomous spiders here in Estonia. Not that I know of anyway... 😁

8 месяцев назад
6miler
6miler

Looks cool, one thing I would suggest is to put a crown on your roller. This will help center the belt better on your drive roll. I've found if you try tracking a belt with a flat roller itll either move to one side or the other never in the middle where you'd like it. Keep up the good work!

8 месяцев назад
Donn DIY
Donn DIY

Yes, the crown is a must.

8 месяцев назад
Freeforester
Freeforester

Drive chains either side of the 'rollers' (needs sprockets)with blocks as carriers are your better bet for longer lasting low maintenance carrier, look at Palax machine Combi MII, GREAT WORK!

8 месяцев назад
Donn DIY
Donn DIY

If the belt turns out to be rubbish I'll convert it to chains. 😀

8 месяцев назад
BarnStangz
BarnStangz

My old man isn't the best with computers. He is a engine builder and likes to weld. I showed him your channel and he is going wild! At 74 he is back in his shop building stuff! It's great to see a inspirational channel like this!

8 месяцев назад
BarnStangz
BarnStangz

@Donn DIY Thank you so much for the reply! Yes I will tell him, just last weekend we started up work again on an engine we started building almost 8 years ago! But yes, your videos are great, shot well and will get people interested in building! Humans like to build!!! Have a great day sir!

8 месяцев назад
Donn DIY
Donn DIY

Very cool! Say hi to your father and thanks for letting me know he got motivated. That is exactly what I want this channel to do. It is very hard to find motivation sometimes and if my videos fill that void I'm very pleased. May he have great projects! 💪

8 месяцев назад
ЮрГри
ЮрГри

Не перестаю удивляться твоим творчеством. Молодец. 👍👍👍😊

8 месяцев назад
Mark Shymanski
Mark Shymanski

A very interesting project. We used a shop built conveyor for our gravel operation. We used actual belting and used flat (not barrel shaped) rollers all the way around and had no problems with tracking but they were pretty wide belts so that may have made it easier to track them. Would the tires work okay if you flipped them over so the tread was against the rollers? The tension on the belt as well as the weight of the wood may flatten them enough to work better?

8 месяцев назад
Donn DIY
Donn DIY

I found a strip of actual conveyor belt and gonna use it on my conveyor instead of the tire. The current joints don't roll over the rollers that well.

8 месяцев назад
Robi Schellekens
Robi Schellekens

I don't know if you want to spend money on it. In Belgium there are companies who redo truck tires they can sell you the tread in one pies as long as you want. Regards

8 месяцев назад
Donn DIY
Donn DIY

I already found a strip of actual conveyor belt that I'm gonna use. Don't want to spend money, no. 😀

8 месяцев назад
Evgen Ko
Evgen Ko

Что это?

8 месяцев назад
dillrepair
dillrepair

the other thing with this is i'v e been playing a lot with old treadmills lately... the motors are good for repowering things like drill presses and sanders etc.... but you could potentially use the belt and rollers for a project like this too if you ever do another one. yours is great as it is

8 месяцев назад
Donn DIY
Donn DIY

I don't know. 🤔

8 месяцев назад
Kirk Nelson
Kirk Nelson

Don't know why you sold your metal brake but looks like you need to build a new one, better add it to the list :)

8 месяцев назад
Donn DIY
Donn DIY

I sold it so I have to make a version 2.0 that is beefier and wider. So it is in mu to-do list for sure. 😀

8 месяцев назад
gennadiy igumnov
gennadiy igumnov

Да где нет люфта там всё туфта.

8 месяцев назад
PIHER CLAMPS
PIHER CLAMPS

Glad to see our Maxipress Clamps in such a great project! Congratulations We hope you enjoy our tools

8 месяцев назад
Donn DIY
Donn DIY

Cheers! These clamps are the best! 💪👍🤘

8 месяцев назад
Wilfrid Kolarik
Wilfrid Kolarik

Good ideas for the job and very professional, quality video. Tank you

8 месяцев назад
Donn DIY
Donn DIY

Thank you for watching!

8 месяцев назад
Brenton Paterson
Brenton Paterson

Woo hoo. Heavy duty sheet metal bender project coming!! Great work.

8 месяцев назад
Donn DIY
Donn DIY

Yes! 💪

8 месяцев назад
Gašper ajdnik
Gašper ajdnik

I'm a mechanic 👨‍🔧, i repair cars, motorcycles, lawn movers, chainsaws, snow blovers. I work whit my brother, we work in our dads workshop. I've been working on cars for 16 years. I like watching your videos 😉. Keep Up The good work 👍. Cheers. :-)

8 месяцев назад
BigBlueMotors
BigBlueMotors

Don't work harder, work smarter. Great job. Looks like you need a set of center punches.

8 месяцев назад
Marcel Baur
Marcel Baur

love your work - thank you

8 месяцев назад
Eisen
Eisen

Would angle iron ribs help with the feeding and also to help flatten the tire?

9 месяцев назад
Donn DIY
Donn DIY

Don't know, have to try it.

8 месяцев назад
MrAJWorks
MrAJWorks

Master, interesting to watch👍

9 месяцев назад
Francisco Lopez Jimenez
Francisco Lopez Jimenez

Good job

9 месяцев назад

Далее

Belt Conveyor Build - Part 2

18:01

Belt Conveyor Build - Part 2

Donn DIY

Просмотров 1,1 млн

Making tank chair tracks

18:59

Making tank chair tracks

Make it Extreme

Просмотров 6 млн

Егор Крид - Голос

3:05

Егор Крид - Голос

Егор Крид

Просмотров 1,3 млн

МЫ ПРЕВРАТИЛИ ВОСК В ЗОЛОТОЕ КОЛЬЦО!

8:51

IT'S FINISHED! - Tracked Amphibious Vehicle Build Ep. 25

25:07

IT'S FINISHED! - Tracked Amphibious Vehicle Build Ep. 25

Donn DIY

Просмотров 2,3 млн

How to Make a Pipe Bender

26:08

How to Make a Pipe Bender

Rock & Fix

Просмотров 1,1 млн

Homemade 300cc TANK / PART 3 ( Tracks )

25:08

Homemade 300cc TANK / PART 3 ( Tracks )

Doctor D.S.

Просмотров 2,2 млн

Hydraulic CAR JACK modification

11:12

Hydraulic CAR JACK modification

Made in Poland

Просмотров 9 млн

Chainsaw Bar Mount - Log Splitter To Firewood Processor Ep. 4

12:17

Making mobile Gas-Powered Belt Conveyor

23:42

Making mobile Gas-Powered Belt Conveyor

Made in Poland

Просмотров 2,3 млн

TOP 6 TODAY's MOST AWESOME DIY IDEAS

14:07

TOP 6 TODAY's MOST AWESOME DIY IDEAS

WOW DIY INVENTORS

Просмотров 2,7 млн

Егор Крид - Голос

3:05

Егор Крид - Голос

Егор Крид

Просмотров 1,3 млн

МЫ ПРЕВРАТИЛИ ВОСК В ЗОЛОТОЕ КОЛЬЦО!

8:51

Шуруповерт За 890 Рублей Из Светофора и Makita

15:29

Шуруповерт За 890 Рублей Из Светофора и Makita

Из Мастерской

Просмотров 47 тыс.

Настоящий SE2 !

19:41

Настоящий SE2 !

Андрей Чинитель

Просмотров 62 тыс.

ПЕРЕПИСКА С ОДНОКЛАССНИЦЕЙ! ТРЕБУЕТ ДЕНЕГ я ж мать

26:43