Como hacer una llave con otra llave‼️‼️😱😱🔑🔑🔑

  • Опубликовано: 5 месяцев назад

    Job OthonielJob Othoniel
    подписчиков: 3,8 млн

Joe Culpepper +62
Joe Culpepper

That's just freaking amazing. I never thought about a key made from a wrench . Nicely done.

3 месяца назад
RoyalTee Lawn Care & Landscaping +1
RoyalTee Lawn Care & Landscaping

@Jon Pierce expecially if you drive a ford 🥴

3 месяца назад
Hanz Birds +1
Hanz Birds

@Jon Pierce now that I think about it, it would be pretty cool

3 месяца назад
GOAT OF DUTY +5
GOAT OF DUTY

Done FREEHANDED, thats the the most amazing fact

3 месяца назад
Hanz Birds +7
Hanz Birds

Yeah, but ya gotta wonder WHY

3 месяца назад
Роман Петрович +1
Роман Петрович

Молодец. Быстро и качественно сделан ключ из хорошего металла, впервые такое вижу.

Месяц назад
jrsouders
jrsouders

I agree. This guy is a master with an L-Head grinder. I've never seen anybody else this good and I was a machinist for 44 years.

3 месяца назад
The0Mann +1112
The0Mann

Imagine using a 10mm wrench for a key. Thing would always be missing.

3 месяца назад
afrodrift2
afrodrift2

@Josh Wright lmao for me when I was young I would legit put it in a particular spot on my car and van it would be gone 🤣 good times

13 дней назад
Josh Wright
Josh Wright

@afrodrift2 It's because of two reasons, firstly the 10mm is a very commonly used size and secondly there's a lot of people in the world who are completely useless at putting tools away when they're done.

13 дней назад
Tgray2064
Tgray2064

@afrodrift2 most common

14 дней назад
MASTER JAY 😇
MASTER JAY 😇

😂😂😂🤣🤣

27 дней назад
Joshuwarius The 1st
Joshuwarius The 1st

Underrated

Месяц назад
Joaquin Uriarte
Joaquin Uriarte

This dude has mad skills with the grinder 👍🏻 I don’t know how he can have a steady hand, for those who have never used a grinder, it isn’t easy to be that smooth and steady.

29 дней назад
Fabio Marengone
Fabio Marengone

Olha outro nível parabéns 👏 eu gostaria de fazer uma pra mim show

Месяц назад
Андрей Касьяненко
Андрей Касьяненко

Я в далёком детстве сделал себе ключ из обломка ножовочного полотна. Там на конце как раз отверстие есть для колечка))) С продольной выборкой я не заморачивался. Просто на наждаке сделал рабочую часть тоньше чтобы она входила в цилиндр. Заодно от нагрева отпустился металл чтобы не сильно калечить штифты. Точил в маленьких тисках установленных на тубарете. Тупо зажал ключ и пластину, по нему и точил. Ключ изначально делался как запасной при утере связки чтобы просто попасть и потом сменить личину. Носил его в портмоне. Сам ключ получился раз в шесть тоньше оригинала. Это и была цель.

3 месяца назад
Sandro Gomes
Sandro Gomes

Esse é um verdadeiro gênio parabéns muito top👏🏼👏🏼👏🏼👏🏼

19 дней назад
Jose antonio Gutierrez molina +16
Jose antonio Gutierrez molina

Es lo más genial 😁 que e visto hoy... simplemente me encanto y me gustaría tener una de estas obras de arte muchas felicidades a este genio

4 месяца назад
Jose antonio Gutierrez molina
Jose antonio Gutierrez molina

4 месяца назад
Luigi Lozada +1
Luigi Lozada

😂😂😂

4 месяца назад
Kokos Agraz +1
Kokos Agraz

X2!!

4 месяца назад
David Gwin +1
David Gwin

I once was called CNC-DG for my porting and polishing skills back in the day at the machine shop. Iv got nothing on this man. Extremely amazing eye ball skills👍

3 месяца назад
Juan johnson
Juan johnson

Only problem is the steel is going to cut away at the brass pins. That's why most keys are made from brass. Still really cool. And like others have said. That's the most impressive grinder work I've seen. During any one of those steps I'd have a 80%+ chance of going to the emergency room with my thumb in a bag of ice.

3 месяца назад
Dustin +638
Dustin

This human has some skills with the grinder, never seen anyone else grind a flat that perfect before not to mention the free hand work. I couldn't care less if it works to open anything.

3 месяца назад
agostino condò
agostino condò

@Big RHINO Nagy l

День назад
Subhajit Behera💞💞
Subhajit Behera💞💞

@Big RHINO Nagy zoo

День назад
Krist Lkr. Kumar
Krist Lkr. Kumar

@Big RHINO Nagy 📱📱📱p 📱📱📱📱📱 PPL .

7 дней назад
B_Rath Gaming
B_Rath Gaming

bro la😍💤

9 дней назад
K Gurunadham
K Gurunadham

Yes ., If slip or tripping happen fingers will cut ... There are other methods to make a key ...

26 дней назад
Júnior Ribeiro +1
Júnior Ribeiro

É trabalhoso mas ficou bem interessante.

Месяц назад
Rey Misterio +23
Rey Misterio

*_EXELENTE TECNICA!!_* 😎👍 *_ME PREGUNTO SI HAY ALGUNA OTRA MANERA DE HACERLO SIN EXPONER TUS DEDOS? ME REFIERO AL USAR EL ESMERIL MIENTRAS DETIENES LA LLAVE!_* 🤷‍♂️🤷‍♂️

4 месяца назад
CHAMBO Francisco Morales
CHAMBO Francisco Morales

Seguramente la radial que usa a creado unos nervios y ahora forma parte de su cuerpo y por eso no se corta 🤣😂🤣😂 Supongo que empezaria tardando 2 ó 3 horas en la primera y se quedaría hecha un hasco, pero la necesidad y que llevará 10 ó 15.000 llaves hechas....

3 месяца назад
jose javier rubio
jose javier rubio

Si tienes una ferretería cerca por dos euros te la hacen con una máquina copiadora y los dedos los tienes a salvo 😜😂😂 eso sí hay que reconocer que el tío es un crack.

4 месяца назад
osmin
osmin

Otra llave u otra técnica?

4 месяца назад
Edith Tapia Menares
Edith Tapia Menares

@Félix Ojeda Ramírez pol

4 месяца назад
Félix Ojeda Ramírez
Félix Ojeda Ramírez

Por norma de seguridad no se debe de usar guantes cuando se utiliza el esmeril. Pero sí debe de sujetar la pieza con una pinza de presión.

4 месяца назад
anonanon 10
anonanon 10

Once had an old school locksmith in Londom make me a Lambretta key by hand, very impressive. You won't find skills like this at your local Timpson 🤣

3 месяца назад
C A I O +1
C A I O

This idea is great, the only problem is that each key has a unique and different sequence. But maybe if you made just one fitting, it would be possible to produce this on a large scale.

3 месяца назад
Repent Sinner +1
Repent Sinner

It probably won't work initially, not saying it can't be fine tuned but he'd have to take calipers to it and would be a multi hour process

3 месяца назад
Ana Lucia Lucia
Ana Lucia Lucia

E lindo trabalho que você fais Deus abençoe muito vocês

3 месяца назад
Gilson Oliveira +1
Gilson Oliveira

Uma maravilha

Месяц назад
PONCHÓ H. SÁNCHEZ +7
PONCHÓ H. SÁNCHEZ

Eres un maestro y muchas gracias por el video eres grande amigo bendiciones para todos 👍🙏✌️✌️🎉👼👼

4 месяца назад
johnny
johnny

Que pasada ...esto aquí en mi país lo hacen las máquinas ..unos moldes , increíble

3 месяца назад
Control Freq
Control Freq

Awesome skills! I'm pretty skilled with my hands, but this detail skill makes me look like an amateur. Disagree with material choice if you will, but talent like this is rare.

19 часов назад
Phil Holman +2
Phil Holman

Cool! That really is a great skill. Thanks for sharing!👍✌️

3 месяца назад
Boothy
Boothy

Very accurate and skillful. Bravo 👏

3 месяца назад
Daniel Novoa
Daniel Novoa

Mis respetos 👏

3 месяца назад
Óscar javier Tarazona Cadena
Óscar javier Tarazona Cadena

Excelente trabajo, me gusto mucho

26 дней назад
Rui Golega +1
Rui Golega

ADOREI MUITO BOM 👍👍👍

2 месяца назад
Dave Volkman +1
Dave Volkman

Amazing. Both for inventiveness AND skill. Absolutely amazing.

3 месяца назад
Timothy Vaher +12
Timothy Vaher

Sir, A Locksmith, Machinist Extraordinary! Absolutely an Artist to the Highest Caliber!

3 месяца назад
Bigg A
Bigg A

How long did that take to complete? You’re good!

3 месяца назад
Rose Marie Santiago Sobre Alas de Águila
Rose Marie Santiago Sobre Alas de Águila

Lo felicito por su destreza! 👍🌹

3 месяца назад
Rafael Nascimento
Rafael Nascimento

Esse cara é bom 👍

2 месяца назад
Chris Garcia
Chris Garcia

Just amazing skills man hands down🔥! And not to mention I would love to buy me one of those hand made keys. Sign me up for 6 lol

18 дней назад
Michael Gordon +20
Michael Gordon

That is freaking awesome. Would love to have one of my keys like that.

4 месяца назад
Little Shepherd Farm
Little Shepherd Farm

Late last year I had to finally buy a new lawn tractor. I had my old one so Jerry rigged that my neighbor who bought it from me had to get his mechanic to check it over to figure out just how to start it and keep it running. LOL. That being said my new Cub Cadet lawn tractor only came with 1 key and when I asked about getting a spare the guy said they don't come with one. So...I called my brother who has a mini forge and I took about 3 pounds of brass over to him and he made a spare key for me out of brass and he got to keep the excess which was more than it took to make my spare tractor key. And it turned out really cool cuz I didn't have to pay anything for it except about $2 in gas to go to his place and back. But this one in the video is really cool too.

3 месяца назад
HVAC Life
HVAC Life

You’re obviously very skilled with a grinder but can you get the tolerances necessary to open a modern lock? Do all the keys work the first time or does it take a lot of tinkering?

3 месяца назад
Tema Retpo +4
Tema Retpo

Техника на грани фантастики! Особенно- в работе с электроинструментом..

3 месяца назад
GreatDomesticWar +1
GreatDomesticWar

На грани травмотологии

3 месяца назад
Curtis Benjamin Israel +1
Curtis Benjamin Israel

I would definitely buy that key..whether it opened anything or not. Amazing!!🔥🔥

3 месяца назад
Jackie Kennedy
Jackie Kennedy

I would be truly impressed if you showed that both keys work in the door or ignition, etc.

27 дней назад
Cristian +18
Cristian

Wow it looks amazing! I would have loved to have that as my 🔑

4 месяца назад
Tdawg
Tdawg

Because it won’t work in modern cars. There’s like some kind of nfc ship in the key. When the car doesn’t defect it the ship, it thinks it’s being hot wired

4 месяца назад
Suporte Informática
Suporte Informática

Top demais 😀

3 месяца назад
Maria Lucia Nascimento
Maria Lucia Nascimento

Show de bola parabéns

2 месяца назад
Bonsai di Gabry +1
Bonsai di Gabry

INGENIUS IDEA!!!!!! SO GOOD!!!! BRAVO!!!!

3 месяца назад
みおChannel +4
みおChannel

カッコイイ!フリーハンドで回転工具を当てて正確に削ってるのがとんでもなく凄い…

3 месяца назад
Silver Silverium +34
Silver Silverium

A todos nos gustaría tener llaves asi de chulas y resistentes💪😁💪

4 месяца назад
Michal Novy
Michal Novy

This gentleman is an excellent locksmith. really cool original idea.

Месяц назад
Melody
Melody

This is great but the steel will damage the brass pins over time

Месяц назад
Richard King +1
Richard King

Looks awesome! Does it work?

3 месяца назад
Oscar Amezcua
Oscar Amezcua

Quedó muy bien , me voy a ser una 🤣

26 дней назад
Jorge Heron Trujillo +13
Jorge Heron Trujillo

Tremenda habilidad. Felicitaciones...

4 месяца назад
Nick S +24
Nick S

Now that's talent. Skill, where do I send a key & wrench I want this done. I'd pay 50+ to have this done.

3 месяца назад
Nick S +1
Nick S

@Stringg Gadgets no joke, im a tool man im fearless but respectful with any major machinery, fork lifts, excavators, pretty much anything, im a landscaper and rental property maintenance dude,. Ok.. but the angle grinder and disk grinders, I got mad respect for them, they're jumpy. It's the tool I especially watch exactly what's going on in one hand and the other, or while pluggin the thing in I watch extremely close to where the disk is in relation to my hands or body or anywhere else for that matter. People have had ugly facial injuries with grinders.

3 месяца назад
Stringg Gadgets
Stringg Gadgets

Bro doesn't fear losing a finger or two

3 месяца назад
Austin Bilton +1
Austin Bilton

Damn dude. You have some insane grinder skills. That is insanity good job bro

3 месяца назад
JOSÉ DUARTE +1
JOSÉ DUARTE

Lindo trabalho

2 месяца назад
james bradley
james bradley

This man is a wizard!! Teach me your ways!!

3 месяца назад
FuckEbonics +46
FuckEbonics

That's really cool. I make my own keys all the time but not to this extent.

3 месяца назад
jjodoin05
jjodoin05

Awesome! Where can we get one made?

3 месяца назад
David Brown
David Brown

Nice, I'm going to convert my 5lb lump hammer into my front door key, which end should I use ?

3 месяца назад
Tc Bowen
Tc Bowen

Wow. Incredible freehand work.

3 месяца назад
Phillip Collins
Phillip Collins

Great idea 💡

3 месяца назад
Domingo Salvador Putrino +38
Domingo Salvador Putrino

Más importante que la llave, es la maestría con que maneja la amoladora!! Saludos de Villa Luzuriaga Buenos Aires Argentina.

4 месяца назад
Vince Glez GB
Vince Glez GB

@franco h.l ¿De verdad creés que no sabe del riesgo?... No podría lograrlo de usar guantes o usar un pedestal para la cortadora.

4 месяца назад
CHAMBO Francisco Morales +1
CHAMBO Francisco Morales

Para hacer esto, es más seguro no llevar guantes, si la amoladora te engancha...

4 месяца назад
Daisy Ramos Lafontaine-Werlich
Daisy Ramos Lafontaine-Werlich

@franco h.l Él mas q nadie debe d saberlo!

4 месяца назад
Daisy Ramos Lafontaine-Werlich +1
Daisy Ramos Lafontaine-Werlich

eso sí es verdad profecional a todo dar

4 месяца назад
franco h.l +3
franco h.l

Y la seguridad? Seguramente es un profesional, pero deben advertir sobre los riesgos de usar una herramienta de corte sin protección.. Es muy peligroso 😱

4 месяца назад
Cristobal Ibarra +4
Cristobal Ibarra

Freehand?! That's freaking amazing!

3 месяца назад
Tom Edward
Tom Edward

Love that key. Impressive

3 месяца назад
Glenn Sambrana
Glenn Sambrana

That's wicked , good work !!!I love it .

3 месяца назад
Felipe Nau
Felipe Nau

No Brasil fazer isso com uma chave 13 é muita ousadia! Pra quem é mecânico sabe.

7 дней назад
Jose luis Castro +40
Jose luis Castro

Mis respetos para este don la habilidad q tiene ya casi yo como jelatina

4 месяца назад
Руслан Головчук
Руслан Головчук

Классная идея!

3 месяца назад
Damasceno Damasceno
Damasceno Damasceno

👏🏻👏🏻👏🏻👏🏻👏🏻😊 sensacional

3 месяца назад
Paul McCormick
Paul McCormick

That is really cool,I want to try it now

2 месяца назад
Juan Pablo Segura
Juan Pablo Segura

Quiero una de esas!!

3 месяца назад
Александр Фомин +9
Александр Фомин

Да уж, вот так мастер, какая точность исполнения🔥

3 месяца назад
Злой Гений +2
Злой Гений

А какая точность? Не факт что этот ключ что-то откроет да и ключ тут совсем не сложный. Вас наверное бы удар хватило если бы вы видели какие ключи делают на оптикошлифовальном станке.

3 месяца назад
Jason Wilson +2
Jason Wilson

Now I’m gonna have to try this. Thanks for the idea.

3 месяца назад
Tabbs1
Tabbs1

Wow I'd have all my keys in a cool design thats 👌 🤘

3 месяца назад
Nasrin D
Nasrin D

Now this is called MASTER KEY !!🔑 👍🏼👍🏼

Месяц назад
frog ilicious
frog ilicious

brilliant idea. that key will never break.

3 месяца назад
Y X +32
Y X

That's some steady hands you got there. All with simple tools. Great work.

3 месяца назад
James Fair +2
James Fair

Holy shit I really would love to have one made but there’s no way I can do that myself. That’s some serious skill and rock steady hands.

3 месяца назад
Slipstreams 101
Slipstreams 101

Can we just talk about how dangerous that is To cut on a fixed position with a easily breakable cut off wheel

3 месяца назад
David Gonzo Official
David Gonzo Official

Do you do this for hobby only or would you take on custom orders ?

3 месяца назад
Marco Carrillo
Marco Carrillo

That Is An Awesome Idea!

3 месяца назад
Rafael José Castro Mardones +5
Rafael José Castro Mardones

Un trabajo digno de un maestro.👍👍👍🇨🇱

4 месяца назад
God Man
God Man

I would pay to have that done for sure. That is cool

3 месяца назад
Robert Ryan +32
Robert Ryan

He has got serious skills! That’s way harder than he makes it look.

3 месяца назад
Lawrence Carter
Lawrence Carter

@Dragon Bond really...try anything like this and see how it goes...

3 месяца назад
Dragon Bond +1
Dragon Bond

@Lawrence Carter how is it not real

3 месяца назад
Lawrence Carter
Lawrence Carter

Dude..it's not real..lol

3 месяца назад

Далее

Como hacer una LLAVE de Repuesto ( Copia de llave)

2:42

Como hacer una LLAVE de Repuesto ( Copia de llave)

Supercreativo

Просмотров 52 тыс.

Говорит Украина. 85-й день. Прямой эфир

3:59:15

Говорит Украина. 85-й день. Прямой эфир

Телеканал ДОМ

Просмотров 45 тыс.

KIM EKAN SHOU 13-SON | SHOK: ALISHER UZOQOVNI ALDASHDI 😱

1:28:41

KIM EKAN SHOU 13-SON | SHOK: ALISHER UZOQOVNI ALDASHDI 😱

Sevimli TV

Просмотров 772 тыс.

Como hacer llave a Swich de motocicleta

7:50

Como hacer llave a Swich de motocicleta

Ricardo Gudino

Просмотров 10 тыс.

como PULIR los FAROS del COCHE con POLIMERO LIQUIDO | Hablamos de PRECIOS€

16:51

como PULIR los FAROS del COCHE con POLIMERO LIQUIDO | Hablamos de PRECIOS€

Como Hacer Esto y Lo Otro

Просмотров 77 тыс.

Como cortar carne al pastor de un trompo paso a paso

1:18

Como cortar carne al pastor de un trompo paso a paso

El Camaleón en accion

Просмотров 13 тыс.

Best Of Bollywood - 1940 || Old Hindi Songs || Jukebox

48:56

Best Of Bollywood - 1940 || Old Hindi Songs || Jukebox

Nupur Movies

Просмотров 1,8 млн

Как я меняю бегунки в обуви и не только

13:08

Как я меняю бегунки в обуви и не только

Твори Чуди Фантазируй

Просмотров 1,2 млн

Що таке радіація [Цікава наука]

12:16

Що таке радіація [Цікава наука]

Цікава наука

Просмотров 51 тыс.