I didn't believe it myself! I welded a barrel of pipes and it all worked!

  • Опубликовано: 3 месяца назад

    CraftMasterCraftMaster

    To heat my workshop in winter, I made a wood-burning stove. It was burning for a long time, and even a day later there were still hot coals in it.

    Thermal imager ali.pub/5aj1fe

    Friends, my name is Renat! I am the author of the CraftMaster channel.
    On this channel, I show everything that I did with my own hands.
    Creative ideas, helpful tips and great homemade products!
    We transform ordinary things into unique ones! Subscribe, it will be interesting! -made -made -grown

Blitz makes uneven MM +6
Blitz makes uneven MM

I worked in a metal fabrication and erection business when I was 18 and cherished those cold hard days for everything I learned. I get the same feeling from watching your video. This wood stove was genius. Great job!

2 месяца назад
Natural Milk Honey and Zen Retreat
Natural Milk Honey and Zen Retreat

I need a pyramid welded please? I'll let you play in my woods

3 дня назад
Gary Knackstedt +345
Gary Knackstedt

You will drastically improve the heater’s performance if you run a pipe from the outside to the air intake. Right now, cold air is being pulled inside your building to make up for the combustion air and whatever air is going up the chimney. Pull the combustion air into the heater from outside so the cold air doesn’t mix with the air in the room.

2 месяца назад
safety first in texas
safety first in texas

@michael allen no one i know sleeps in the shop. If they do its a beadroom. Good caution bad application location.

11 дней назад
Evari Suarez
Evari Suarez

X

12 дней назад
Darren Craig
Darren Craig

It will put off so much heat that it doesn't matter.

Месяц назад
Benjamin Padilla
Benjamin Padilla

@Stephen Low absolutely , be warm in there really quickly.

Месяц назад
Johnny D
Johnny D

Positive, Negative and Equal Pressure makes a huge difference if heated area isn't sealed properly. Same principle for A/C and A/C sizing.

Месяц назад
Chris Langdell +8
Chris Langdell

Very cool build. I wish I knew what type of stove this was. So I could read the concept behind it of exactly how it works. Very cool with a nice long burn time. Most stoves these days your lucky to get 8 hour burns out of them.

Месяц назад
mikefromspace
mikefromspace

A rocket mass heater stove is best

Месяц назад
Ricardo Lubes +2
Ricardo Lubes

Parabéns, ficou muito bom

2 месяца назад
YHRIM +4
YHRIM

You have a lot of great little "out of the box" solutions. Like making your own "wing nut"s and using a piece of paper to mark straight lines on a pipe. Very Nice 👍 You got a new sub. For years, I have also used an angle grinder for all my metal cutting. Except for drilling a hole or maybe the occasion hole saw, I used an angle grinder and often used it for far heavier work than they were ever made for. And they suck for trying to cut holes or circle plates, especially in 1/8" or thicker. Got to the point I hated using an angle grinder, mostly due to how slow, expense in disks, and all the dust. For years I had wanted a plasma cutter, but had no way to afford a smaller hypertherm unit which is what I really wanted to save up for. But after all this time I finally gave up and just got a chinese plasma cutter recently, and so wished I had bought one a long time ago. They're not the best, but they are SO MUCH better than having to do everything with an angle grinder. And with a few mods and buying better tips, they work fairly well and makes metal work enjoyable again. Angle grinders have their place, but I'm glad to use them far less :-)

Месяц назад
James 45 +83
James 45

People always chastised me for keeping odd bits of pipe and scrap metals around . I always laughed as I made a lot of needed tools and things useful for me and others. Now I’m an old guy and still keep my shop and do a lot of things when I’m able. This was a great video.

2 месяца назад
CurtisDrew1
CurtisDrew1

I laughed out loud when I saw the rusty old barrel. Around here Once used clean barrels, with paint still on them are $5 US each.....

Месяц назад
WichitaRick +1
WichitaRick

Yes same here :) but the cost of scrap metal was so low was not worth the cost to even haul it off was a big help! Was raised around towns with refinerys so have seen all manner of ways to re-use that material my Great grandma's and grandma's shot gun houses were on foundations made of 3 in pipe and concrete;) and gma's garage was framed in 3 in pipe:) doesn't rattle when the wind blows:) I spent over a yr.making rail road scrap angle iron into brackets to use in framing! built several out buildings a greenhouse and a full deck using fence posts and those heavy brackets and lag bolts! people who lol before,couldn't believe how fast and sturdy that stuff was(is) I still show people how to re frame fences using angle iron and deck screws is cheap,easy and never breaks:)Peace Rick

Месяц назад
SomethingElse +1
SomethingElse

Throwing away material is like throwing away the extra Legos pieces that come with a set. It costs nothing to store them if you're already maintaining shop space. Only people that don't build things would be so stupid as to criticize anyone for saving pipe, rod, plate, fasteners, etc. Part of inspiration comes from seeing the material you have available, and when you need something, you never know how long it will take and how much it will cost.

Месяц назад
John Sandoval +5
John Sandoval

My next door neighbour just returned from an estate sale with a truck load of old steal pipe, angel iron, elbows, rod, and flat sections. One man's trash is another's treasure... For sure... It was beautiful...

Месяц назад
M barek Boushaki
M barek Boushaki

1

2 месяца назад
cathode follower +23
cathode follower

I'm really impressed. This guy is tops. It's an amazing design and very creative. I highly recommend watching the entire video. Make sure you like and subscribe. This channel is a keeper. I'm.not sure why anyone would give thumbs down on this.

Месяц назад
Jessi Taylor
Jessi Taylor

Love it, want one! Who wouldn't want one. You're creative skills are off the charts. 👍🏻🇺🇲

Месяц назад
WichitaRick +1
WichitaRick

Nice ,glad it worked out this well! have wanted to recreate similar version for yrs. Worked in a metal shop with a similar style,but the external pipes were capped BUT filled with sand from sand blasting and molding scrap,they held the heat for several days!and street bricks inside would also be cheap and hold heat! ,saw another post that said adding drive shafts internally , ours had those also and we often used them for legs and other heavy pcs like gates and benches!happy heating p.s. I used to burn old phone books in my cabin wood burner:) Peace Rick

Месяц назад
Peter Lockhart +16
Peter Lockhart

Nice! Try a horizontal unit now with a few driveshafts INSIDE boiler style, wire a small squirrel cage fan placed on floor to blow in from rear. You wont believe the heat and capacity.

2 месяца назад
Michael Schauperl +50
Michael Schauperl

Thats a very cool built! Well done. Have you thought of filling half of the outside pipes with ceramic gravel & sand... that could store store some of the heat as well.

2 месяца назад
Dr Wrong
Dr Wrong

​@Carpe Diem Arts _"added pipes on the outside already added 100# to the stove"_ A perceptive and well grounded point.. =) For those born after the internet, _(and non-nerds)_ the Unicode symbol "#" _(U+0023, Dec:35, or alt code 35)_ when placed _after_ a number was previously very commonly used to indicate a measurement scale of weight.. specifically in Pounds _(approx 0.45kg)_

9 дней назад
Carpe Diem Arts +1
Carpe Diem Arts

As it took 2 men to roll the barrel onto the triangle frame, it's obvious the added pipes on the outside already added 100# to the stove. That's plenty of thermal mass. But what he did was make a radiator, more than doubling the surface area of the stove with the inside and outside of the pipes.

10 дней назад
Colmcille Gardner +2
Colmcille Gardner

Sand, gravel and gypsum are very good at storing and slow releasing heat. Water could also be heated and circulated through pipes for radiant heat in a break room floor. 👍👍👍

19 дней назад
Dr Wrong +1
Dr Wrong

@Josh GuyFace why contain the heat when the desire is to warm the room air?

2 месяца назад
Josh GuyFace +8
Josh GuyFace

The pipes force an updraft that circulates the heat in the room. Ceramic would hold the heat, but not spread it around. Filling every other pipe would solve both problems

2 месяца назад
ThePeca1988 +11
ThePeca1988

We had the one with the compressed sawdust. Much simpler in construction. It worked like a charm in the workshop 👌

2 месяца назад
Влад Пупкин
Влад Пупкин

для опилок надо дно , наверное не из металлических прутьев? Отверстия сверлить?

9 дней назад
Red Proton
Red Proton

I really like your idea to use a 55-gallon drum to make a TLUD batch stove. You have basically insulated your barrel stove with the pipes that you welded on the outside. They are blue and green on the thermal camera. They should have been red.

Месяц назад
James Payne +2
James Payne

I built a very controllable heater from 3/16 plate, 4 in exhaust, screw adjustable intake. Very good at long slow burns. Only real issue is the flue runs cool and creosote builds up in the pipe. I just happened to have a 4 in flue brush so I can go up about twice each season and brush out the buildup. I was thinking about a bread baking oven using a similar pipe design to yours where the pipes would be inside the drum running from the lower fire box up to a smoke chamber and out the flue. The pipes would carry the exhaust through the baking chamber to heat the oven from almost 360 degrees around to eliminate hot spots. Like your innovative designs.

6 дней назад
Brian Hind +21
Brian Hind

Sir ! I admire anyone who has the patience to fiddle around making something like that. I would have made the worst fabricator or machinist in the world ! Thank heavens we are not all made the same. I made my living my troubleshooting communications radio, radar & process controls. If I needed something welded, I called a welder. If I needed something built, I summoned a carpenter or metal worker, or pipefitter. Well done, & an entertaining video.

2 месяца назад
Richard Mourdock +8
Richard Mourdock

Very creative. I had an acquaintance who attempted to do something similar. He was using a barrel given to him by a guy from the local gas strip airport. He started cutting on it before venting it or cleaning it out,... not knowing it had previously held aviation gas. He was 41.

2 месяца назад
Nayr Tnartsipac +1
Nayr Tnartsipac

Oh shit!

Месяц назад
Roger Hecker
Roger Hecker

Are you saying he never made it to 42? That’s why you always steam any barrel out for at least a half hour. Just to be on the safe side

Месяц назад
Andrzej Poreda +1
Andrzej Poreda

Świeta jest zrobiona ta robota pozdrawiam twócę tego filmiku 👍👍👍👍

Месяц назад
Buckley Baker +2
Buckley Baker

Nice stove I have built several wood stoves this design seems like it may be very efficient

2 месяца назад
Earl Bresler
Earl Bresler

What I like is you basically have free heat if you have access to free wood. No electricity or any other fuels required. Great job.

2 месяца назад
Barry Ford +19
Barry Ford

My dad used to make wood-buring stoves out of 55-gallon drums. He made the firebox horizontally on the long axis of the barrel, with doors and other parts from a Franklin stove kit. These worked very well. He also made one out of a water heater, which was long enough to lay meter-long logs inside. The fires would burn for days and days!

Месяц назад
CynthiaQ10
CynthiaQ10

Your channel is fascinating. I’m intrigued by your work and ingenuity. Mostly using things that can be repurposed for something extremely useful. Well done 👍🏻!

Месяц назад
Watching Videos +10
Watching Videos

Amazing what you can do with a grinder. All I need now, is an arc welder. (I loved not knowing what was being built, so I could watch it like a murder mystery.) Great video.

2 месяца назад
James Russell
James Russell

Bl look

Месяц назад
Bo McGillacutty +3
Bo McGillacutty

Never cut into a drum like that unless absolutely certain it doesn't contain solvent or fuel vapors, it's one of the most common ways for backyard fabricators to die--explosively. A few handfuls of dry ice can be used to flush out the air and make it safe as CO2 is denser than air and will fill from the bottom, pushing air out the top, if the only opening is at the top. Otherwise fill it most of the way with water such that any combustion volume is minimized.

2 месяца назад
St.George +15
St.George

i like your design, i like the fact that you use the material that you already have. if you have to buy materials may i suggest an alternative to the barrel? i use cut offs from a pipeline sourced from a scrap yard.. the cut off i used was 36 inches across and 1/4 inch thick. make it as long as you want it does not burn out and adds to the thermal mass.

2 месяца назад
J Doboy +1
J Doboy

Ahh Yes,, right-on! #1, 'OUTSIDE DRAFTING',,, & #2, Use a heavy wall 24" - 36" od pipe. I get my pipe pieces from pipeline & piling jobs. usually 1/2" wall stuff. They NEVER burn out! & if they are close to 24" ID,,, an old man-hole lid from the junk yard will fit perfectly inside,,, a very thick, never burn out cast iron grate!. Drill more 1/2" holes in them! IF you weld those outside radiant pipes INSIDE your barrel, you'll most likely put out 10x more BTUs, but you wouldn't be able to remove the top like you do. (no need to weld the inside 'radiant' pipes to the top, use gasket rope & make metal washers to go around the pipes to seal them to the lid. It's a lot more work, but like I said, 10x more heat per load of wood. You could even use 2" or even 3" od pipe, top to bottom,, like just 3 pieces per side, & still have enough room to stack enough wood for an 6-8hr burn. You can also use 2" heavy-walled pipe for your wood burning grates. weld them in, slightly up hill, & just have about 1/4" space between them, so the ash can fall through. You'll burn your hand with the heat that comes out of those pipes! (heat-a-lator) Another thing I would change,,,, I never build a unit without a removable ash pan. It's so much easier to pull out that pan & dump those ashes outside,,,,, along with all of that dust! One more thing,,,,, I also like to use a 9" glass, PYREX pie dish on my front loading door,,,,, so I can see in! ( I wish we could post pictures of OUR HOME MADE UNITS.? ;>)

2 месяца назад
Rob Auerbach
Rob Auerbach

Reminds me of my solar hot water used for heating my home. I don't see way this could not be converted with a pump and then attaching radiators around the space. The man shown is very talented and watching this video could inspire people to learn to weld. A course in welding for men and women should be part of a well rounded education.

20 дней назад
Ryan Williams +2
Ryan Williams

Thank you sir for no annoying music and actual sound! Great build, I'm sure you'll get years out that stove!

2 месяца назад
John Sandoval +37
John Sandoval

What I especially like is no stupid music, redundant parts were sped up, and you emphasised pertinent details... Bravo... Excellent video and editing for us guys with short attention s[pan... Thanks

Месяц назад
simon morneau +5
simon morneau

Thank you!! For showing your genius ideas 💡

2 месяца назад
BubbleOnPlumb +23
BubbleOnPlumb

I really liked the part where you used the level to get base sitting nice and level. Seeing that bubble right on plumb just gave me goose bumps!

2 месяца назад
Имён Фамильевич
Имён Фамильевич

посмотрите внимательнее с 21 минуты - эту базу сдвинули, а значит и уровень не точен! - пол не ровный.

2 месяца назад
454pakr
454pakr

I like your scrap yard. No such thing as useless junk. Nice work!

2 месяца назад
Phillip May +9
Phillip May

I’ve wondered about builds like this except sourcing the air from outside so that you don’t create a draft. Pull air from outside into the barrel, exhaust to outside from the barrel also so that you don’t pull cold air into the shop. Similar to how a window air conditioner works. No heat lost inside due to draft.

2 месяца назад
Matter Drahcir
Matter Drahcir

@Hugh Jarse and create an electric current 👍

Месяц назад
Phillip May +1
Phillip May

@Bob Jones you and my ex. Get in line, my friend. 😉

2 месяца назад
Bob Jones
Bob Jones

@Phillip May i determined i have a milk allergy anyway. and cows eat my food, healthy keto and anti-glutens. still if you kill a cow i have choice words for yo

2 месяца назад
Phillip May +4
Phillip May

@Bob Jones lol. actually natural gas (a primary source of electricity generation) has a 2.75x higher weight of CO2 release than wood does, not counting the CO2 created to produce the NG in the first place. People used wood as a source of heat and power long long before the industrial revolution - when the CO2 emissions became a real issue. So it’s more that you and 20 other people sit idling in the Starbucks drive thru waiting on your electrically made latte and frapp served in paper and plastic cups, that cause wildfires. And now you’re out of latte.

2 месяца назад
Bob Jones
Bob Jones

@Phillip Maybut your firewood is burned from the wildfires you created, which burn holes in the Earth crust and cause volcanoes to erupt clouding the atmosphere for a decade then you have the CO2 you crave but now it's cold and you're out of wood

2 месяца назад
El Guapo +66
El Guapo

When I read "barrel of pipes" I wondered what he meant, so I had to watch. The best thing for me is to watch someone build something he/she designed. Great job young man! And that stash of metal: man, that is expensive. Stay busy and do what you love.

2 месяца назад
Dr Wrong
Dr Wrong

@Bobbie Sue Sanders thanx, you! Hadn't occurred to me! Good plan

2 месяца назад
Dr Wrong
Dr Wrong

Exactly. I nearly always resist 'click baity" titles just on principle. 'Thumb nail' curiosity barely won.. I'm not sad I watched this.. (at 1.5x speed) lol

2 месяца назад
Yun kei Chan
Yun kei Chan

IV、一f、十好ViI心

2 месяца назад
Bobbie Sue Sanders +1
Bobbie Sue Sanders

David....stash of metal....you can go to scrap yard and collect all kinds of metal... I used to go there all the time to get pipes.

2 месяца назад
blech71 +7
blech71

This video is so underrated. There’s so many helpful time saving tricks of the trade here for sure. Thanks for the insight to your craft!

2 месяца назад
Wanda Mise +39
Wanda Mise

You did a wonderful job. I wish I had your skills. I need a wood heater for my shop. Building one out of scrap would be much cheaper.

2 месяца назад
Bob Jack +2
Bob Jack

@BigBirdy100 m I learning new things all the days in this community. Sincerely you advice I have got many free thing. Neighbor piss at me. Call me whoreder. They not know. They bullshitty

Месяц назад
BigBirdy100
BigBirdy100

@Bob Jack yes, actually free. People do put free things on there just to get rid of them JACK. 🙄

Месяц назад
maria altamirano
maria altamirano

Tenerlo de vecino amigo jajajaja

2 месяца назад
Bob Le Clair +3
Bob Le Clair

in the early 70s , we were still able to pick up old train station potbelly stoves for under $400 and cheaper, they went fast,especially after 1978weather,heavy steel air tight stoves became the sot after, New Hampshire was getting some cold weather back then, a friend from work had some coiled tubing going through his stove for hot water, he said, he didn’t need so many coils, three would have sufficed, his pressure gauge was kicking off more than it needed to, I’m retired now, boat person, my heating system is an old brass lantern that hangs over me,I burn paraffin, we don’t get much snow here in Key West Florida

2 месяца назад
Bob Jack
Bob Jack

@BigBirdy100 doh bullshitty. U don’t know!

2 месяца назад
Good Moaning Vietnam
Good Moaning Vietnam

I worked in tunnel construction from the 1960s onwards, when setting up site buildings of timber the blacksmith and welder would make up some stoves, very similar to yours. They used steel pipe and other steel stock bought from scrap yards, instead of the pipes you added around the drum they used a larger diameter pipe with an air gap. The fuel would be coke from the local gas works and the fire kept in 24/7 during the winter, full English breakfasts would be cooked on top and boy it was a brave man to stand beside that stove, you'd get toasted in minutes. H&S would have a fit if that was done now..

Месяц назад
J +2
J

Great work! Great video! FYI… All the other tools in the shop are extremely jealous of the grinder. When you leave your shop they really give him a good grinding. 😂

2 месяца назад
Will Wipf +7
Will Wipf

I may not get it done right away,but I'm going to build one , great work I don't have your amazing creativity but I can follow along, thank you sir!

2 месяца назад
ewgny
ewgny

@alex lano A steam powered fan

Месяц назад
alex lano
alex lano

Plutôt que de multiples tuyaux, pourquoi pas multiples ailettes de métal, avec ventilateur électrique ?

2 месяца назад
Michael B. +1
Michael B.

Such great ideas and workmanship..👍👍

2 месяца назад
00UncommonSense00 +3
00UncommonSense00

Hell yeas brother. That is one nice rig you made. Only cost a few cutting wheels, a few welding sticks and some scrap. Last forever. Liked and subbed.

2 месяца назад
James Couch +12
James Couch

I love working with metal. That is an excellent job on the build 👍

2 месяца назад
Knossos22
Knossos22

What I would give to work as fast as this guy does... : )

2 месяца назад
ONALDOPER +5
ONALDOPER

MUITO ÚTIL,GOSTEI MUITO PARABÉNS GUERREIRO. MAIS SUCESSO EM SEUS PROJETOS E FELICIDADE PARA SUA FAMÍLIA.☻👊🏿👍🏿

2 месяца назад
CCP Perrett +61
CCP Perrett

Great skills and creativity. A respirator mask would help to protect your young lungs from grinding wheel dust and silicosis. Just some love from a retired welder's wife.💖

2 месяца назад
Nayr Tnartsipac +1
Nayr Tnartsipac

Mommin it up in here! Gotta love it

Месяц назад
CCP Perrett +12
CCP Perrett

My husband has lung issues now. Mainly from grinding wheel dust. Please protect your lungs. You need them to breathe.😉😎🤗

2 месяца назад
Nathan Tschetter +6
Nathan Tschetter

Good point

2 месяца назад
John Burrows +2
John Burrows

My dad did this exact build in 1966. Only he had a blower system on it. Heated the entire house. He died in 1989 and used it every winter

Месяц назад
Carlos A L cordeiro +3
Carlos A L cordeiro

Ficou ótimo parabéns 👏👏👏👏👏

2 месяца назад
Mark Alford +1
Mark Alford

Amazing amount of creativity well done 👍

Месяц назад
pakchiu ho
pakchiu ho

如果

9 дней назад
Dean Chartier +3
Dean Chartier

I like this channel, I like that he repurposes and uses what others may consider useless junk! Not him he thinks outside conventional thinking and you have genius at work ❤️

Месяц назад
Flat Out +9
Flat Out

Cool idea for temporary use though if in a home you plan to heat every winter all winter the metal of the barrel would not last as long as a thick wood stove/furnace. A risk of blow out in burn barrels.

2 месяца назад
Dr Wrong +1
Dr Wrong

Burn barrels also get a lot of rain on burnt-clean steel, so they go faster. But you're still right, thermally enhanced oxidation is no joke..

2 месяца назад
Gimme Head +1
Gimme Head

Yeah that's what I was thinking. But maybe it will last longer being that it's inside, and out of the elements. Maybe the rust factor won't be quite as bad as with a typical burn barrel. It's a cool (or warm) idea, but that's an awful lot of work if it's just gonna rust out after a winters use.

2 месяца назад
Flat Out
Flat Out

@8Truth Seeking just from experience of using burning barrels they in short time get really thin at the bottoms where the metal ends up like tinfoil.

2 месяца назад
8Truth Seeking
8Truth Seeking

I wonder if the extra resistance to conducting heat through the thinner barrel would be offset by replacing the barrel every couple of years...OR do you mean that it might actually MELT the thinner wall at "any point in time"?

2 месяца назад
Gary +1
Gary

Awesome. Great idea. Looks like it was a fun project too.

2 месяца назад
Tsadikish RM +33
Tsadikish RM

Un gran ejemplo de creatividad...es muy funcional y eficiente.. podría salvar vidas en climas extremos...Dios te ha favorecido con esas manos laboriosas...saludos desde Nicaragua...

2 месяца назад
Matthew Sweet +4
Matthew Sweet

Really cool project, maybe with a stove pipe fan you could get some more heat from that thing into your shop! Almost seems like you built it too good and most of the heat is escaping the shop!

2 месяца назад
Laurian ITL
Laurian ITL

Nice !!! A suggestion ! For greater efficiency, fill the pipes with sand, the heated sand will be like a battery and keep the heat in the shop longer !

Месяц назад
Arnold Bravo +26
Arnold Bravo

What a great job, not everyone does something like that

2 месяца назад
FTH
FTH

I'd put the bolt that holds the air controller on the top instead of the side for safety concerns great job 👍

2 месяца назад
Christian Petersen +42
Christian Petersen

Whenever you are dealing with Sparks or grinding stuff with a cutoff wheel and like that or deburring things ,make sure that your eye protection is first-rate. Not just a pair of glasses. When a spark hits your eyeball it will weld itself into your eyeball and it will not come out ,you will have to go to an ophthalmologist and they will have to grind it out of your eye. Now going to the opthamologist and having that done is only a hour-long procedure but it will scratch like hell until u get it done and its a giant pain in the ass and will keep you down for a whole day maybe a day and a half. I was a machinist for 35 years and had to have this done several times because I was stupid. Don't be stupid ,get pair of really good goggles when you're grinding things.

2 месяца назад
Donavon Hilleren c
Donavon Hilleren c

Yep, learned the hard way exactly that! Uncomfortable as hell

Месяц назад
topspeed250k
topspeed250k

That's a pretty good description but the details are a little inaccurate. The eyeball at the front is a fibrous membrane (clear in front of the pupil) coated with water-based gel. A metal fragment can't "weld" to it. But the hot fragment of metal/grinder is driven hard into the surface and needs to be dug out using the beveled point of a needle (which looks like a sharp pointed crowbar under a magnifying glass) or possibly a burr (which is a miniature toothed ball on the end of a spinning shaft in a Dremel-like instrument, but slower, which cuts like a tiny tool in a milling machine. The fragment isn't "ground out" more like digging a seed out of an avocado. It is painful afterwards, like sand in your eye once the local anaesthetic wears off. I've been on the operating end of those tools many times, and the receiving end a couple of times as I do some hobby metalwork. Use good eye protection, the message is spot-on.

2 месяца назад
Eric B +3
Eric B

I don't know about you kids these days, Christian when I was a young man we used to take a bowie knife and pick those metal bits out of our eyeballs but.../joke.

2 месяца назад
Cynthia Crawford +3
Cynthia Crawford

Ouch

2 месяца назад
Ade Ladd +11
Ade Ladd

I used goggles when I first started grinding. One time a piece of metal went through a gap between the goggles and my nose,bounced off the lens and into my eye,I had to go to hospital to get it out. Now I always use a face shield,much safer.

2 месяца назад
kenneth detro +39
kenneth detro

You need outside combustion air. Otherwise, you are sucking inside air out your chimney and thereby pulling in outside air through all the cracks. What you want is a positive pressure inside your shop so that there is a little bit of warm air pushing out of all the cracks. Just a little will work. At the least, you want a neutral pressure.

2 месяца назад
Arno Lamster
Arno Lamster

Haven'y read something so stupid in a long time.

Месяц назад
Ivan Aslan +1
Ivan Aslan

Why? So you can suffocate?

Месяц назад
Евгений Юрьевич
Евгений Юрьевич

8th grade

Месяц назад
Lee West
Lee West

Excellent video Great editing Awesome creative skill

Месяц назад
El Taller De Gus +6
El Taller De Gus

Muy buen trabajo amigo. Te felicito.👍

3 месяца назад
Michael Bezos +8
Michael Bezos

Definitely a Journeymen fitter/welder. Excellent! Bless the man who can work with his hands. Hats off to you Bro. Subscribed! Great camera work & editing also.

2 месяца назад
HSNWFL +64
HSNWFL

A ceiling fan at a low speed pulls the heat off the pipes, and forces hot air downward. Made degrees difference as soon as I turned it on.

2 месяца назад
michael allen
michael allen

BRILLIANT design!

Месяц назад
michael allen
michael allen

Yes!. Get that heat INTO the room!

Месяц назад
gaby de wilde
gaby de wilde

could run the bottom inlets away from the stove and to the ceiling.

2 месяца назад
Blad Woodlox +5
Blad Woodlox

@monkey brains circulation off the furnace heat raises temps all around instead of it only radiating in one spot ultimately raising room temp

2 месяца назад
JOE SUPPLE BRUNS +2
JOE SUPPLE BRUNS

MIXES (FLOOR-AIR UP) AND (CEILNG-AIR DOWN) UNTIL SAME HOT-COLD TEMPERATURE CAN ROTATE CEILNG FAN BLADES CW OR CCW

2 месяца назад
Walter Davis
Walter Davis

Very cool build. Thanks for sharing

2 месяца назад
Brian Gravitt +29
Brian Gravitt

You got a sub, for the simple fact that you are the FIRST AND ONLY person I have seen so far to make an obvious and intentional effort to shield your welding flashes. Thanks for that!

2 месяца назад
bearded bowhunter +8
bearded bowhunter

That's because there is absolutely no reason too

2 месяца назад
Ja5onl6
Ja5onl6

Not sure what is more impressive cutting 90% with grinder or welding it up with a stick welder. Either way cool build.

2 месяца назад
California Breeze +1
California Breeze

a craft at it's finest.thank you.

2 месяца назад
Christi (christi-christi-vegan-eater) +1
Christi (christi-christi-vegan-eater)

You are definitely gifted...and...brilliant, really. I have wanted to learn to weld my entire life, watching my dad. He is my hero. You, my friend, are brilliantly gifted...and your welds? Amazing. Art. 'Nuff said. Namaste, my friend.

Месяц назад
Ray Marshall +12
Ray Marshall

That is really an awesome build.

2 месяца назад
Fed up With Lies +1
Fed up With Lies

Great work! ❤️🥇

2 месяца назад
Battle Ax +4
Battle Ax

That belt sander attachment is awesome. Cobalt drill bits work great on hard metals. Diablo brand stuff is expensive but worth it.

2 месяца назад
Gordon Couger +30
Gordon Couger

Impressive for heating a shop that long. You could get more heat in the shop by radiating more heat off the chimney pipes. I expect if you are regulating the fire by limiting the air there are combustible products being lost up the chimney. A burner built to make heat from the flue gas would increase the efficiency some more. Moving south to a warmer climate is the ultimate solution.

2 месяца назад
Brett Hess +1
Brett Hess

I lived down south for many years. The weather was terrible. Too hot in summer, wild storms, and still cold in winter. In 1990 it went to 14 below in New Orleans. Besides, moving solved none of my problems, it just caused more.

2 месяца назад
Carl Stephens +1
Carl Stephens

Ask Texans how cold it gets. Even Florida gets cold ( for them) , I used to live in PA, Fla is much nicer

2 месяца назад
Kevin Glennon
Kevin Glennon

We can’t all do that Gordon, we will eventual meet the multitude coming the other way from South to North!

2 месяца назад
Bob Jones
Bob Jones

@Carmen Schumann then you will be painting the heater silver to reflect the sun's rays to it doesn't melt during the day

2 месяца назад
Carmen Schumann +3
Carmen Schumann

. . . just wait am few years, then the warmer climate will come to you !

2 месяца назад
Melonie Walston +11
Melonie Walston

We don't have barrels that heavy gauge steel here in the US that I have found. Great job!

Месяц назад
Warren Houser +1
Warren Houser

Another option is look at water heater tanks, air compressor tanks or kerosene fuel tanks they will be different diameter but will be thick walled.

Месяц назад
angryadrien +1
angryadrien

From my experience, drums designed for liquids are built thick enough to support about 500 pounds of cargo. These are the drums most of us are familiar with. The same style of drum is used to transport steel shot for wheelabrators, and are built thick enough to support about 2,000 pounds of cargo. These seem to be less common, thicker drums. Maybe you can ask around and find a thicker drum.

Месяц назад
Daniel Greenwood +1
Daniel Greenwood

nice workmanship. and love how you didnt bore me with details. you just did the work. thanks

2 месяца назад
One Stop Fab Shop +1
One Stop Fab Shop

And don't forget, he didn't put in any of that God awful music!

2 месяца назад
Jay Johnson +3
Jay Johnson

Have you seen rocket mass heaters? This is similar, if you burn the gases less heat loss to chimney. This is a fantastic design.

2 месяца назад
Patrick G
Patrick G

Bring in combustion air from outside instead of using air from the shop. The slight negative pressure brings cold air from outside into the space you're trying to heat

Месяц назад
Christopher Schultz +6
Christopher Schultz

Two sets of crazy mad skills. Your editing of your video is nothing short of stunning. Speed, pace, and advancement of processes had me glued to watching within 10 seconds. Well done. Second, the shop skills. I’m no welder, but you definately crushed it my good man. The infra red heat section is sweet. I think you can quit your day job.

Месяц назад
Todd Smith
Todd Smith

Agreed. Definitely more than one

Месяц назад
TimmithyZERO +1
TimmithyZERO

That's a great observation it wouldn't matter how good this stove worked without good editing skills to make it watchable

Месяц назад
Anzay Warid
Anzay Warid

What this video lacks is some clear summarised explanation via video to show how the system works and why so many pipes around the barrel were needed.

2 месяца назад
M Thiessen
M Thiessen

Wow. Love it! I was curious though… you cut pipe angles on chop saw but 90 degree cuts with zip.. am I missing something? My chopper does 90’s much faster/cleaner than zip

Месяц назад
Гараж +11
Гараж

Вариант интересен, тем что реализуется верхнее горение и способ подачи воздуха под колосники как в обычной печке. Симбиоз котла длительного горения и колосниковой печи. В рабочем режиме все пиролизные газы хорошо догорают.

2 месяца назад
Александр Скрундь
Александр Скрундь

Ненужное дублирование системы подачи воздуха, для горения дров, достаточно открыть поддувало .Этого будет достаточно для поддержания горения.

2 месяца назад
Jadir Neves +1
Jadir Neves

Notei a capilaridade entre o forno e os tubos externos como barreira para evitar as perdas por irradiações;

2 месяца назад
OMAR C Bustamante +4
OMAR C Bustamante

Impresionante tu trabajo y destreza amigo. Enhorabuena

2 месяца назад
Weld24 +9
Weld24

What a skilled fabricator you are! Really enjoyed watching you build this, at first i didn't know what the purpose was, but was captivated more and more every minute! Could you please tell me if you are using an abrasive cutting wheel on the grinder to cut, or is that some sort of metal cutting blade? I can't see very well. (scratched cornea)I didn't notice too many sparks.

2 месяца назад
CraftMaster +3
CraftMaster

Thanks! This is a metal cutting disc.

2 месяца назад
Rich H +2
Rich H

Excellent craftsmanship! Love the design!

2 месяца назад
aaron stewart +12
aaron stewart

The Hu-niverse Keeps People like you. Well done on becoming a creator, as Humans are supposed to do here. This invention is Fuckin awesome. Well done. Not only did you slow down the wood burn to save resources you also recycled to make the Heater. a hundred Thumbs up is not enough.

2 месяца назад
Temistocles Olivas +1
Temistocles Olivas

Excelente trabajo mis saludos

2 месяца назад
American Hot Topics +5
American Hot Topics

Awesome idea!!! If you put slides on top of the pipe would it give you a little more thermostat control preventing heat conduction/flow or would it be to much work for the small amount of control? Either way I may put a smaller one in my shop, if you dont mind me using your design. Thanks for sharing

2 месяца назад
Dr Wrong
Dr Wrong

@rdkater ..side pipes I think he was referring..

2 месяца назад
rdkater
rdkater

never regulate te airflow in the chimney .

2 месяца назад
Thomas Russell +1
Thomas Russell

Nice build with the surround pipes for extra thermal mass and also acting as a safety shield from the hottest metal.

2 месяца назад
Pp Ss
Pp Ss

Also acts as structural support for the sides of the barrel so it doesn't warp from the heat!

Месяц назад
Robert Ordewald
Robert Ordewald

Thank you for showing us very nice job the only thought I had would be to run several pipes in from the bottom and then out from the top of the barrel similar to what you did so that the those pipes are in contract with the fire directly. Convection will come pull the cold air in from the bottom and blow it out at the top heating more area..

12 дней назад
Peter Ainsworth
Peter Ainsworth

26 - 28 degrees celcius as a workshop temperature is pretty cosy. So all those people with improvement tips can re-think the need to fiddle with it. Excellent job mate!!!

Месяц назад
Mark Koons
Mark Koons

Another way of expressing the need for outside combustion air is that if you don't provide it, you'll end up using warm room air for combustion then replace that warm air with cold air drawn through every flaw in the building's envelope.

Месяц назад
Tony D +18
Tony D

Super cool! That’s a lot of work. I think the steel drum itself will deteriorate too soon to make all that effort with it. Unless that barrel is a heavier gauge than a standard steel drum.

2 месяца назад
fctuber
fctuber

@Edward Tilley actually, I know the temperatures of different phases of fire from being a chef and what gives the most and best Maillard reaction (caramelization of meat protein). A grill burning propane (ok but not all that great) burns at 553°F, that is why a wood fired (better with a great flavor imparted) grill or a lump charcoal (about the best to use for the every day cook) is best. The only way to get hotter is an oxygen assisted flame or a blow torch but then you have to worry about touch taste. But that is all for a different discussion.

2 месяца назад
Dustin Pollard +1
Dustin Pollard

I have a burn barrel that's been sitting outside for decades, in the rain, sun, snow, wind, etc and i burn trash in it without respect to it. It glows red and is treated poorly and i kicked it over a few weeks ago to clean out the ash and thought it would crumble. Stood it right back up and burnt in it again!!. I have 4 or 5 coal stoves i would never treat like that, but its a burn barrel, his stove will be fine.

2 месяца назад
Raymond Smith +1
Raymond Smith

Those things last forever damn near. They don't corrode like you'd think because they'll build up a thin layer of semi sticky charcoal dust around the inside of the drum. The pipes will rust out and have to be replaced several times before the stove. I know this from experience. We used an old "'chicken house" heater growing up.

2 месяца назад
James Brown
James Brown

Pieces of corrugated tin roof would have been far easier and quicker to be put around the outside - but they didn't have them?

2 месяца назад
James Brown +3
James Brown

The drum will go away possibly quite quick, but it's more due to corrosion because of constant change of temperatur than the temps being close to the melting point of the iron? And of course, the hotter the iron, the quicker the oxidation will become. And in comes from inside to outside of course. A doubled up wall, a second wall, made at/to the inside, could help. But the guys liked the work as much as it's result - so they would'nt mind doing it all over again?

2 месяца назад
LadyNicky007
LadyNicky007

Wonderful & ingenious! Going to share this with my my son who’s building is little homestead on an island for his family of 5... If he could find a scrap yard, he could probably do this for his garage... What is the purpose of those pipes all around the tub?? How long did this fabrication take?? I was led to believe that it was necessary to have the heating source at 20 inches from the ground! I didn’t see how you get rid of the ashes!? 🤔 Is there a sliding pan that I didn’t notice? Do you put firebricks or sand at the bottom?? Of course, I don’t need to know all this, but my son certainly does! I’d be so grateful if someone whose into this would fill in on what my son needs to know.. 🙏 He will read the comments.. I read those & their all pretty informative.. However, didn’t see answers to my few questions! 😕

Месяц назад
ker mkine +1
ker mkine

toujours génial ! bravo

2 месяца назад
Paul Marciniak
Paul Marciniak

What would happen if you draw some intake air from the far end of the exhaust pipe? Or from even closer .. then introduce a flapper to adjust the mix.. then maybe recombust the hot gases from flue

7 дней назад
jamesmcsparron +21
jamesmcsparron

I thought when you mentioned pipes you were going to set up a water heating system. Great build though I wonder how long the barrel steel will last before it burns out?

2 месяца назад
Dr Wrong +1
Dr Wrong

@James Couch I thought so too..

2 месяца назад
Joseph Jucker +1
Joseph Jucker

@Shaun Kelly His could use his barrel electroplate itself. A few heavy trash bags (w/o holes) make a surprisingly decent temporary insulator

2 месяца назад
Angelo Green +2
Angelo Green

Copper pipes spiral add to exaust or copper sticks network inside exaust pipe will recover more heating with water circuit.

2 месяца назад
Angelo Green +3
Angelo Green

Add some copper pipe spirals with a water pump for hot water, some water radiators and add two automatic safety pressure valves on the top of radiators.

2 месяца назад
James Couch +3
James Couch

It looked a lot thicker than an ordinary barrel.

2 месяца назад
Tracey Luck +1
Tracey Luck

I was stunned on how thick your barrel was, there almost to thin to weld in USA

Месяц назад
SteeleWood Affirmation
SteeleWood Affirmation

That's what I was thinking also.

Месяц назад
Bill Allen +3
Bill Allen

That's the heaviest chimney pipe I've ever seen used...wow...from Wyoming USA 🇺🇸 🤠

2 месяца назад
J Agripa
J Agripa

Sweeet! This may have been asked already, what size of electrode and which welder model are you using?

Месяц назад
Laura Diaz Amaro +2
Laura Diaz Amaro

Aquí se juntad 3 cosas 1 el tener las herramientas. 2 la creatividad . 3 el conocimiento .para usar las dos cosa 😁

2 месяца назад
Cliff Griffen +4
Cliff Griffen

I retired at 58 years old 13 years ago. I was a craftsman love to build stuff, certified journeyman welder and fabricator worked on ships cranes bridges etc. I was one of the three welders that built the judy underneath the Seattle 1st avenue bridge. Still there today. I built all kinds of stuff. people have no idea the amount of hours this takes.!!!!! It's unbelievably time consuming.!!!!!!! I'm surprised he didn't take any shortcuts . How about a cheap $200 band saw cutting parts while he did other stuff? Or a chop saw for crying out loud cuts down the time by 90%. Even just sandblast the stuff from the beginning before he used it. Doing it by hand and grinding it by hand with a brush takes forever in itself.Why didn't he use a MIG welder it's so much easier and faster. Cuts down the time by 50% maybe 70%. Incredible job great craftsmen. Fantastic job. I just don't understand totally using no automation. Even the rod he was using was probably 6011 or 6013 which means he had to take the slag off. Oh well great job absolutely

2 месяца назад
Castinn +3
Castinn

He had what he had. The shop did not look like he was rolling in $$. If he was, he probably would had bought a wood stove. Instead he made on for essentially nothing but the electricity for the welder and grinder. Besides, it was about saving money, not saving time.

2 месяца назад
Matthew Arnold +1
Matthew Arnold

Awesome idea and great work.

2 месяца назад
Rando Jo +1
Rando Jo

Thanks for the video. You learned me a few things (thumbs up!)

2 месяца назад
thingstoknow +1
thingstoknow

great job very but very efficient; i would cut the pipes at the bottom at an angle 15 - 30 deg and weld them around the barrel at about an inch maybe more from the floor to enhance the upward air draft

Месяц назад
Fausto Minuzzo
Fausto Minuzzo

Ciao! .. e grazie di questo tuo bellissimo video. mi ha impressionato l'ingegno che ha messo in opera... Un grande maestro del far da se. Apprezzo moltissimo le persone che trasformano la loro idea in un manufatto reale! Ti sei meritato alla grande, la mia iscrizione. Fauto (Roma, Italia) - 5 nov 2021 - 18:14

2 месяца назад
Álvaro J. Batista +1
Álvaro J. Batista

Parabéns! Objetivo atingido!

2 месяца назад
Arthur Wagar +1
Arthur Wagar

Love all those new power tools.

2 месяца назад

Далее

22 секрета от ТОП сантехника

2:12:27

22 секрета от ТОП сантехника

Стройплощадка

Просмотров 2 млн

меня добавили в бабл квас!! (помянем)

11:18

Gear manufacturing. I came up with an interesting way.

17:36

Gear manufacturing. I came up with an interesting way.

Mehamozg

Просмотров 357 тыс.

Homemade Offroad Trike Motorcycle Part1

25:06

Homemade Offroad Trike Motorcycle Part1

Make and Ride

Просмотров 19 тыс.

Куры несутся зимой как летом

39:36

Куры несутся зимой как летом

Lora Life

Просмотров 2,3 млн

AMAZING! Top 3 Bright Ideas with Drill and Old Saw!

14:07

AMAZING! Top 3 Bright Ideas with Drill and Old Saw!

Fixotronic

Просмотров 26 тыс.

How to build a smokeless wood stove with an oven on another level

13:56

How to build a smokeless wood stove with an oven on another level

Creative Cement Projects

Просмотров 10 млн